Print Job Results Abnormal 7-11Print Results Do Not Match Print Job ContentBroken lines are visible.Problem 1: Printhead is out of alignment.Solution: Use the printer operation panel to align the printhead. (Æ P.7-33)Random, Bizarre characters are printing.Problem 1: Data from the print job data stream has been lost.Solution: Switch the printer and computer off, then switch them on again and startthe print job again.Problem 2: Another printer driver was selected for the print job.Solution: Select the correct printer driver for the printer and try again.(Æ Setup Guide)Problem 3: Font selected for printing not supported.Solution: Make sure that the font used in the text of the software application hasbeen installed correctly. For details, see your software application manual.Colors WrongOnly one color is printing.Problem 1: Monochrome printing is selected in the printer driver for the print job.Solution: On the Main tab of the printer driver, select Color for the Color Mode andtry again. (Æ Printer Driver Help)Problem 2: Ink supply has run low in one or more ink tanks.Solution: Check the level of the ink in the tanks and replace a tank if it is nearlyempty. (Æ P.6-2)Wrong colors are printing.Problem 1: The printer driver is not performing color adjustment.Solution: Use the printer driver to adjust the colors with the settings on the ColorMatching or Color tab of the Color Adjustment dialog box. (Æ PrinterDriver Help)
