Chapter 55-15F-5-115.4.2.2 Making Connections 0014-7543/ i-SENSYS LBP5360Connect the PC to the machine.Making PreparationsItems to Prepare- PC to which SST v3.22 or higher and LBP5360 firmware have been installed- USB cable (USB1.1,USB2.0)Procedure1) Start up the PC.2) Connect the machine and the PCB with a USB cable.F-5-123) Turn on the main power as follows to start download mode.Shifting to Download Mode3-1. While holding down on the Online key (1) and the job cancel job key (2), turn on the power.3-2. Press the settings key (3) several times; when 'SERVICE MODE' is indicated, press the reset key (4) to start service mode.3-3. Press the setttings key (3) several times; when 'F/W UPDATE GR' is indicated, press the reset key (4).3-4. Press the setttings key (3) several times; when 'USB' is indicated, press the reset key (4).3-5. When 'OK?' is indicated, press the OK key (5) to start download mode.CONTROLRegisterd Firms Found FirmLBP5360CONTXXxxv0102XXenv0103 >>> RegistRegistered fir mware Fir mware registration completed.>>> Batch Registration ResultsC l i ck a bu t t o n t o exe c u t e .CONNECTCANCELEXITO KRegister Fir mwareDelete Fir mwareDelete Backup DataSystem ManagementService Support Tool DLM0 (Ver.3.21E)LBP5360CONTXXxxv0102XXenv0103USB cable
