Chapter 22-272.5.2.3 Skew correction by the registration shutter 0013-8243/ i-SENSYS LBP5360 / i-SENSYS LBP5300The machine picks up the sheet of paper from the manual feeder. The machine uses the manual feeder paper sensor to check the presence/absence of paper in themanual feeder, and uses the registration roller to move the paper inside the machine.1) When the paper is fed to the registration unit, the leading edge of paper hits the registration shutter to be corrected for the skew feeding.2) The paper is warped, as the registration shutter is held with the springs and not opened unless some forces are exerted.3) The stiffness of paper being warped lifts up the registration shutter and the paper goes through the shutter. Accordingly the skew-fed is corrected.F-2-352.5.2.4 Transport Speed Control 0013-8253/ i-SENSYS LBP5360 / i-SENSYS LBP5300The machine is designed to switch the speed at which paper is moved according to type so as to prevent fixing faults.Specifically, the DC controller switches the speed over 4 settings in response to the media selection command coming from the video controller. The particulars ofspeed control are as follows:T-2-2Paper type Weight Paper type SpeedPlain paper 60-105g/m2 Plain paper 1/1Heavy paper105-120g/m2 Heavy paper 1 4/5120-176g/m2 Heavy paper 2 4/5176-216g/m2 Heavy paper 3 1/2Coated paper 105-120g/m2 Coated paper 1 4/5120-160g/m2 Coated paper2 1/2Label sheet Label sheet 4/5Envelope Envelope 4/5Registration shutterPaperPaperRear side of printerRegistration shutter Rear side of printer123
