Canon i-SENSYS LBP5300 Series Service Manual

Also see for i-SENSYS LBP5300 Series: User guide User guide

Contents

Chapter 11-131.5.7 Setup Menu (4) 0015-1832i-SENSYS LBP5360USER MAIN.T-1-7T-1-8CONNECT.RECOG. ON*, OFFEXT.RX BUFFER OFF*, ON This item is displayed only when an optional RAMmodule is installed.Item Setting NotesADJ.START POS.OFFSET Y(TRAY) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(TRAY) -2.22 mm to +2.22 mm (0.0 mm*)OFFSET Y(CASS1) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(CASS1) -2.22 mm to +2.22 mm (0.0 mm*)OFFSET Y(CASS2) -5.0 mm to +5.0 mm (0.0 mm*) OFFSET Y (CASS2) and OFFSET X (CASS2) aredisplayed only when the optional paper feeder isinstalled.OFFSET X(CASS2) -2.22 mm to +2.22 mm (0.0 mm*) OFFSET Y (CASS2) and OFFSET X (CASS2) aredisplayed only when the optional paper feeder isinstalled.OFFSET Y(DUP.) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(DUP.) -2.22 mm to +2.22 mm (0.0 mm*)RECVRY PRINTING ON*, OFFSPECIAL MODE J OFF*, ONSUBSTITUTE SIZE OFF*, ONSP.IMAGE MODE OFF*, LEVEL1, LEVEL2HDD MAINTENANCEHDD ALL ERASE OFF*, ON This item is displayed only when an optional hard diskis installed.QUICK FORMAT - This item is displayed only when an optional hard diskis installed, and HDD ALL ERASE is set to OFF.STD FORMAT - This item is displayed only when an optional hard diskis installed.SP.PRINT MODECOATED PAPER OFF*, ONCURL ADJUSTMENT OFF*, ONUPDATE FIRMWAREUSB -NETWORK -Item Setting NotesADJ.START POS.OFFSET Y(TRAY) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(TRAY) -2.22 mm to +2.22 mm (0.0 mm*)OFFSET Y(CASS1) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(CASS1) -2.22 mm to +2.22 mm (0.0 mm*)OFFSET Y(CASS2) -5.0 mm to +5.0 mm (0.0 mm*) OFFSET Y (CASS2) and OFFSET X (CASS2)are displayed only when the optional paperfeeder is installed.OFFSET X(CASS2) -2.22 mm to +2.22 mm (0.0 mm*) OFFSET Y (CASS2) and OFFSET X (CASS2)are displayed only when the optional paperfeeder is installed.OFFSET Y(DUP.) -5.0 mm to +5.0 mm (0.0 mm*)OFFSET X(DUP.) -2.22 mm to +2.22 mm (0.0 mm*)RECVRY PRINTING ON*, OFFSPECIAL MODE J OFF*, ONSUBSTITUTE SIZE OFF*, ONSP.IMAGE MODE OFF*, LEVEL1, LEVEL2HDD MAINTENANCE (Only when equipped with the hard disk)HDD ALL ERASE OFF*, ON This item is displayed only when an optionalhard disk is installed.QUICK FORMAT - This item is displayed only when an optionalhard disk is installed, and HDD ALL ERASE isset to OFF.STD FORMAT - This item is displayed only when an optionalhard disk is installed.SP.ADMIN.MODEItem Setting Notes