Chapter 55-18F-5-174) When the result of downloading is indicated, click [OK].F-5-18The end of work with the SST does not mean the end of work to be performed on the machine. Be sure not to turn off the machine until it indicates '00 ready'.It takes about 1 min from when [start] is clicked to when '00 ready' is indicated.If turning OFF the machine during the writing process, it is necessary to download the firmware again. If turning ON the machine under this condition, the machinestartup with the download mode, so perform the firmware download.If turning OFF/ON the machine once again without downloading, the error code 'E602-0002' will be displayed and disabling redownload; thus, PCB replacementwill be required.5) Click [EXIT].Service Support Tool DLM0 (Ver.3.21E) DownloadReturn to Main MenuCancelInformationSelectableFirmwareLBP5360CONTSelect the firmware to bedownload, rhen click the [Start]button.Click the button of task to beexecuted.Country/Region: AllLanguage: CommonVersion: 01.03CONTSelectable FirmwareInitialCompleteDownloadConnect via USBXXxxv0102XXxxv0103ControlDownload FirmwareStartReturn to Main MenuCancelformationO KSelectableFirmwareLBP5360CONTDownlaod completeCountry/Region: AllLanguage: CommonVersion: 01.03CONTSelectable FirmwareInitialCompleteDownloadClose USB PortXXxxv0102XXxxv0103Task using SST has ended.The machine will start writing processautomatically."Add New Hard ware Wizard" will startautomatically; click Cancel button to close it.Click [OK] button to return to Main Menu.CautionO KService Support Tool DLM8 (Ver.3.21E) Download
