Canon i-SENSYS LBP5300 Series Service Manual

Also see for i-SENSYS LBP5300 Series: User guide User guide

Contents

Chapter 33-9F-3-603) Detach the rear sheet metal [1].- 15 screws [2]F-3-614) Detach the right rear sheet metal [1].- 5 screws [2]F-3-625) Move the video controller PCB [1] to the left, and then remove it.- 9 screws [2]- 1 connector [3]F-3-633.1.10 Memory Controller PCB3.1.10.1 Before Removing the Memory Controller PCB 0013-9934/ i-SENSYS LBP5360 / i-SENSYS LBP53001) Remove the fixing unit. (page 3-25)[Removing the Fixing unit]2) Remove the network board. (page 3-10)[Removing the NetworkInterface Board]3) Remove the rear cover. (page 3-1)[Removing the Rear Cover]4) Remove the upper cover. (page 3-2)[Removing the Upper Cover]5) Remove the right cover. (page 3-1)[Removing the Right Cover]6) Remove the left cover. (page 3-1)[Removing the Left Cover]7) Remove the video controller PCB. (page 3-8)[Removing the VideoController PCB]8) Remove the high voltage power supply PCB. (page 3-11)[RemovingHigh-Voltage Power Supply PCB]9) Remove the low voltage power supply PCB. (page 3-10)[RemovingLow-Voltage Power Supply Assembly]3.1.10.2 Preparation for Removing the Memory ControllerPCB 0014-8701/ i-SENSYS LBP53601) Detach the rear cover. (page 3-1)[Removing the Rear Cover]2) Remove the fixing assembly. (page 3-25)[Removing the FixingAssembly]3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]4) Detach the left cover. (page 3-1)[Removing the Left Cover]5) Detach the right cover. (page 3-1)[Removing the Right Cover]6) Remove the video controller PCB. (page 3-8)[Removing the VideoController PCB]7) Remove the high-voltage power supply PCB. (page 3-11)[Removingthe High-Voltage Power Supply PCB]8) Remove the low-voltage power supply PCB. (page 3-10)[Removing theLow-Voltage Power Supply PCB]3.1.10.3 Removing the Memory Controller PCB 0013-9935/ i-SENSYS LBP5360 / i-SENSYS LBP53001) Disconnect all the connectors and the flat cables [2] from the DCcontroller PCB [1].F-3-642) Detach the sheet metal [1].- 2 screws [2]F-3-65F-3-663) Detach the laser / scanner cover [1].- 8 screws [2]