04L9-03YWhen a job is canceled from the computer or the data is less than one page, the data may remain in the printer memory,and the job may not be completed properly. As long as the printer remains in this state, you cannot perform printingbecause the printer cannot receive the next data.In this case, force the printer to output the print data using the following procedure.IMPORTANTIf you cannot output dataYou cannot output data for the following jobs or in the following state.Data from the PCL/PS/UFR II printer driverWhen the (Message) indicator is onPerform a soft reset."Canceling the Process Currently Being Performed (Soft Reset)"The data that is being printed is deleted.When you output data, print it again.NOTEAbout automatic outputWhen [Timeout] under [Interface] in the Setup Menu is set to [On], even less than a page of data is dischargedautomatically. (Data from the PCL/UFR II printer driver is not output.) [Timeout] for a job is set to 15 seconds in thedefault settings.1Press [ ] ( : Reset).2Select [Form Feed] using [ ] and [ ], and then press [OK].3Select [Yes] using [ ], and then press [OK]. The data remaining in the memory is printed.Outputting Data (Forced Output)㻝㻤㻟㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
