1. Enter an arbitrary printer name in [Name], and then press the [ENTER] key on your keyboard.2. When using the printer in Queue Server Mode, select [Defined] in [Type].3. When using the printer in Remote Printer Mode, select [Remote Parallel] in [Type], and then set [Port] to [LPT1].4. Specify the settings for the other options, and then press the [ESC] key on your keyboard.5. If the confirmation box appears, select [Yes], and then press the [ENTER] key on your keyboard.6. Press the [ESC] key on your keyboard to go back to the [Print Server Configuration] list.6Assign a queue to the printer.1. Select [Queues Serviced by Printer], and then press the [ENTER] key on your keyboard.2. Select the printer name specified in Step 5, and then press the [ENTER] key on your keyboard.3. Press the [INSERT] key on your keyboard.4. Select the queue created in Step 3, and then press the [ENTER] key on your keyboard.7Press the [ESC] key on your keyboard until the [Exit PCONSOLE] window appears, and then select[Yes] to exit PCONSOLE.8When using the printer in Remote Printer Mode, start the print server.1. When you are using a computer exclusively as the print server, enter "PSERVER.EXE" in the computer as the printserver name, and then press the [ENTER] key on your keyboard.2. When using the NetWare file server as the print server, enter "LOAD PSERVER.NLM " in thefile server, and then press the [ENTER] key on your keyboard. The settings for NetWare print service are now completed.NOTEAbout Queue Server ModeWhen using the printer in Queue Server Mode, you do not need to specify these settings.9Next, configure the NetWare protocol settings for the printer.For details on the procedure for configuring the NetWare protocol, see "Configuring the Protocol Settings."㻠㻤㻥㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
