[GrayscaleConversion]Select the method for converting color print data to grayscale for printing.This setting is for converting color data to B&W data.[sRGB]: It calculates the grayscale value using the sRGB standard color conversionmethod.[NTSC]: It calculates the grayscale value using the NTSC standard color conversionmethod.[UniformRGB]:It takes the average value of the Red, Green and Blue color values as thegrayscale value.7Specify the settings for [Print Settings] as the following, as needed.[Copies] Specify the number of copies to be printed.[Paper Size] Specify the size of paper to print.[Paper Type] Specify the type of paper to print.[Image Orientation] Select the orientation of the images from [Auto], [Vertical] or [Horizontal].[Print Position]Set the location of the images from [Auto], [Center] or [Top Left]. When [Auto] is selected, if theprint location is specified in the TIFF format data, it will print at the specified location. If theprint location is not set, it will print centered. Since print location is not specified in JPEGformat, if [Auto] is selected, it will print centered.[Zoom] Specify whether to enlarge or reduce the printing. When it is set to [Auto], it automaticallyscales them to match with the effective print area of the paper and prints.[Enlarge Print Area]Specify whether to expand the printable area and print.Depending on the document to be printed, part of the edges of the paper may not beprinted.[Print 2-Sided] When it is set, it will print 2-sided.[Binding Location]Set the binding position on the long side of the paper (long-edged binding) or the short side ofthe paper (short-edged binding).If binding is set from the printer side, the position of the "gutter" is automatically adjusted on thefront and back sides of the paper.㻞㻤㻟㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
