04L9-0AENOTETable descriptionBold values in the table indicate the default settings.About the icon: The settings for the printer driver are prioritized for this item.Setting Item SettingValue Setting[Copies] 1 to 9999 Specifies the number of copies to be printed.The printer prints the specified number of copies.[Offset Y]/[Offset X]-50.0 to0.0 to+50.0(mm)Adjusts the printing position in the vertical direction (Y) or the horizontal direction(X) by the specified value."Adjusting the Printing Position for All the Jobs"[Binding Location][LongEdge],[ShortEdge]Specifies which edge of the paper, the long edge or short edge, is to be bound.When performing 2-sided printing, the printer adjusts the binding locationautomatically according to the paper surface.If [Long Edge] is specified, the binding location is created on the long edgeof the paper.If [Short Edge] is specified, the binding location is created on the short edgeof the paper.[Gutter] -50.0 to0.0 to+50.0(mm)Specifies the gutter width for printing with the binding location created. A gutter iscreated with the image shifted by the specified value.You can shift the image in the "+" direction with a positive value and in the "-"direction with a negative value.[Setup] Menu ([Layout] Options)㻡㻣㻢㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
