04L9-00SWARNINGDo not install the printer in a location near alcohol, paint thinner, or other flammable substances. If flammablesubstances come into contact with electrical parts inside the printer, this may result in a fire or electrical shock.Do not place the following items on the printer.Necklaces and other metal objectsCups, vases, flowerpots, and other containers filled with water or liquidsIf these items come into contact with a high-voltage area inside the printer, this may result in a fire or electrical shock.If these items are dropped or spilled inside the printer, immediately turn OFF the power switch (1) and disconnect theinterface cables if they are connected (2). Then, unplug the power plug from the AC power outlet (3) and contact yourlocal authorized Canon dealer.When installing or removing the optional accessories, be sure to turn the printer OFF, unplug the power plug, andthen disconnect all the interface cables and power cord from the printer. Otherwise, the power cord or interfacecables may be damaged, resulting in a fire or electrical shock.CAUTIONDo not install the printer in unstable locations, such as on unsteady platforms or inclined floors, or in locationssubject to excessive vibrations, as this may cause the printer to fall or tip over, resulting in personal injury.The ventilation slots are provided for proper ventilation of working parts inside the printer. Never place the printer ona soft surface, such as a bed, sofa, or rug. Blocking the slots can cause the printer to overheat, resulting in a fire.Do not install the printer in the following locations, as this may result in a fire or electrical shock.A damp or dusty locationA location exposed to smoke and steam, such as near a cookery or humidifierA location exposed to rain or snowA location near a water faucet or waterA location exposed to direct sunlightA location subject to high temperaturesA location near open flamesWhen installing the printer, gently lower the printer to the installation site so as not to catch your hands between theprinter and the floor or between the printer and other equipment, as this may result in personal injury.When connecting the interface cable, connect it properly by following the instructions in the e-Manual. If notconnected properly, this may result in malfunction or electrical shock.Be careful when handling the main board or the ROM. Touching the main board or the sharp parts such as theedges of the ROM may result in personal injury.When moving the printer, follow the instructions in the e-Manual to hold it correctly. Failure to do so may cause youto drop the printer, resulting in personal injury."Moving the Printer"IMPORTANTInstallation㻟㻠㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
