04L9-0CEYou can specify the settings for sleep mode using the following procedures."Setting the Printer to Sleep Mode""Sleep Mode Entering Conditions""Releasing Sleep Mode"IMPORTANTPower consumption when the power is OFFEven if the printer is turned OFF, power is still consumed slightly while the power plug is inserted in the AC power outlet.To stop the power consumption completely, unplug the power plug from the AC power outlet.Setting the Printer to Sleep ModeThere are the following four methods for setting the printer to Sleep Mode.Setting the printer toSleep Modeautomatically whenit is not operatingSpecify the time interval until the printer enters Sleep Mode in [Sleep Migration Time].You can specify the time interval between [5 minutes] and [60 minutes]. The default is [5minutes].We recommend that you use this option in the default setting.Setting the printer toSleep Mode usingthe printer's controlpanelPress [ ] (Energy Saver) on the printer's control panel.Setting the printer toSleep Mode from anetwork computer () &" ( C. ) ." 5 (D C0 ) ( , Control], and then click [Execute].Setting the printer toSleep Mode on thedesignated timeevery daySet the [Sleep Mode Timer] under [Timer Settings] to [On], and then set the time when itautomatically goes in the Sleep Mode in [Sleep Mode Time].If the above operations or settings are performed, and the entering conditions described in "Sleep Mode EnteringConditions" are fulfilled, the printer enters Sleep Mode.Sleep Mode Entering ConditionsThe Sleep Mode entering conditions are as follows.Panel operation has not been performed.No data has been sent from the computer.The printer is not starting up.A shutdown is not being performed.[Sleep Even if Error] is set to [On].The following setting items in the [Network] options are set to [Off].[WINS Resolution] in [TCP/IP Settings][IPSec] in [TCP/IP Settings] (LBP6680x only)[AppleTalk][SMB Server] in [SMB] (LBP6680x only)The printer has not communicated on the network for more than 15 seconds.A USB cable is not connected.The SNTP or DHCP communication is not to be performed within 1 minute.It is not accessing USB memory or the SD card. (LBP6680x only)The Wake Up function is not to be performed within 1 minute.Sleep Mode㻢㻝㻥㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
