04L9-068This printer allows you to specify the printing functions from the printer driver. However, some printing functions arespecified from the control panel or the Remote UI. The following table shows the functions to be specified from the controlpanel or the Remote UI.For details on the items you can manage using the control panel, see "Setting Items."Function Overview of the FunctionMulti-purpose traypaper sizeSpecifies the size of the paper loaded in the multi-purpose tray."[Setup] Menu ([Paper Source] Options)""[Select Feeder] Menu"Multi-purpose trayprioritySpecifies whether the printer should detect the paper source in order starting with the multi-purpose tray."[Setup] Menu ([Paper Source] Options)"Drawer N (N = 1, 2)sizeSpecifies the size of the paper loaded in the paper drawer (Drawer 1 or 2)."[Setup] Menu ([Paper Source] Options)""[Select Feeder] Menu"Standard paper sizeSince paper size cannot be specified when printing from DOS, UNIX or other operating system,specify it using this setting."[Setup] Menu ([Paper Source] Options)"Invalid paper traySpecifies what the printer does when paper that is the same size as the paper size of thereceived data is not loaded in the selected paper source."[Setup] Menu ([Paper Source] Options)"Auto selection Specifies the paper source to be automatically selected."[Setup] Menu ([Paper Source] Options)"Standard paper typeSince paper type cannot be specified when printing from DOS, UNIX or other operating system,specify it using this setting."[Setup] Menu ([Paper Source] Options)"Adjust Print PositionAdjusts the printing position in the vertical direction (Y) or the horizontal direction (X)."[Setup] Menu ([Layout] Options)""[Setup] Menu ([User Maintenance] Options)"Alternative methodIf the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the lastpage."[Setup] Menu ([Layout] Options)"Image Refinement Set whether to use the smoothing process to print the jagged edges of text and graphics."[Setup] Menu ([Quality] Options)"Recovery printingSpecifies whether to print the partially printed page when the printer stops printing due to apaper jam or an error occurring."[Setup] Menu ([User Maintenance] Options)"Check paper sizeSpecifies whether the printer should stop printing, displaying the message or continue printing."[Setup] Menu ([User Maintenance] Options)"Substitute sizeThe printer switches the paper size if the paper of the size to be used is not loaded in theprinter."[Setup] Menu ([User Maintenance] Options)"Plain paper curladjustmentIf printed plain paper curls, specify the setting for this item."[Setup] Menu ([User Maintenance] Options)"Functions Which Can Be Specified from the Control Panel㻞㻢㻢㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
