[Sec. Print Del.Time] *1 *2[1 hour], [2 hours], [3 hours], [6 hours], [12hours], [24 hours]Set the amount of time before secure printjobs are automatically deleted."Specifying a Password for a Documentand Printing (Secured Print) (LBP6680xOnly)"[Secure Job Log] [Off], [On]If [On] is specified for this item, the print logof the job being printed is saved, and thetotal number of printed pages (page counter)is counted even when you turn the printerOFF.[Select PDL(PnP)] *1*2[UFR II], [UFR II XPS], [PCL5e], [PCL6],[PS3] *2 , [XPS (Direct)] *2If you want to connect theprinter and computer with a USBcableThe printer driver for this printer may beinstalled automatically when the USBcable is connected.You can select the type of the printerdriver ("UFR II", "UFR II XPS", "PCL5e","PCL6", "PS3", or "XPS (Direct)") to beinstalled in this item at the time.If you want to connect theprinter and computer with a LANcableIf you are using Windows Vista, you candetect the printer automatically using theWSD (Web Service on Devices) protocol.You can select the type of the printerdriver ("UFR II", "UFR II XPS", "PCL5e","PCL6", "PS3", or "XPS (Direct)") to beinstalled on the automatically detectedprinter in this item.[Mng. Settings][Settings Key Lock] [Off], [On]When you set to [On], [ ] (: Settings) is locked and you cannotoperate the Setup menu.When you set to [Off], [Settings KeyLock] is not locked.* You can unlock the locked Settingskey only from the Remote UI.[Adjust Screen][Contrast] (-3 Dark -0- +3 Light)If the display is not clear, adjust the contrastor brightness to the desired level.[BacklightBrightness] [Off], [Level 1], [Level 2], [Level 3][AnimatedInstruction] [Off], [On]Specifies whether the printer should displayan animated picture in the display when apaper jam occurs or when a toner cartridgeis replaced.[Show TonerGauge] [Off], [On] Specifies whether the printer should displaythe icon that indicates the toner remaining.[Set. Comp. Notify] [Off], [1 second], [2 seconds], [3 seconds]Specifies the display time of messages thatare displayed when the setting completes. If[Off] is specified, no setting completionmessage is displayed.Set the scrolling speed for the message㻡㻢㻣㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
