04L9-087You can change the network settings using various methods.Network Setting ItemsSoftware That Can Be Used for the Network SettingsNetwork Setting ItemsThe setting items you can change using NetSpot Device Installer, FTP Client, or the control panel on the printer are asfollows.NOTEThe settings that you cannot specify using FTP Client, NetSpot Device Installer, or the controlpanel on the printerSpecify them using a Web browser (Remote UI).(However, you cannot specify the settings with even using the Remote UI.)About the item namesIn the following table, the characters shown in parentheses are exclusively for FTP Client.For example, "[IP Address] (INT_ADDR)" is displayed differently as follows, depending on the application.Web browser (Remote UI): [IP Address]NetSpot Device Installer: [IP Address]config file of FTP Client: [INT_ADDR]Control Panel: [IP Address]General Settings: Can be specified : Cannot be specifiedOption Contents DefaultSettingsUsingNetSpotDeviceInstallerSettingsUsingFTPClientSettings Usingthe ControlPanel[System ManagerPassword](ROOT_PWD)Up to 16 characters (Blank)[System Manager](SYS_CONTACT) Up to 32 characters (Blank)[Device Name](DEVICE_NAME) Up to 32 characters LBP6680/LBP6670[Location](SYS_LOC) Up to 32 characters (Blank)[Permit End-User'sJob Operation](USER_JOB_CONT)ON, OFF OFFSupport Link[URL](LINK_URL1)Up to 128 alphanumericcharacters http://www.canon.comNetwork Setting Items㻟㻥㻣㻌㻛㻌㻥㻢㻟Downloaded from ManualsPrinter.com Manuals
