Canon iR6570 Series Portable Manual

Also see for iR5570 Series: Service manual INSTALLATION PROCEDURE General Timing Chart/General Circuit Diagram Service bulletin Service bulletin

Contents

*502 A file system error hasoccurred.1. Type in CHK-TYPE corresponding to the partition inquestion, and execute HD-CLEAR; then, turn off andthen back on the power.2. Replace the HDD, and re-install the system software.*6The machine does not permit execution of HD-CLEARin service mode (to prevent loss of partition informationsuch as address book and filter data).1. Ask the user to download the address book data usinga remote UI.2. Start download mode from service mode; then,execute full formatting usingthe SST, and re-install the system software. Thereafter,turn off and then back on the power.*71. Execute HD-CLEAR by setting "1', '2', '3', and '5' toCHK-TYPE; then, turn off and then back on the power.2. Replace the HDD, and re-install the system software.*8Recovery operation for the Boot partition necessarilyrequires the use of the SST in safe mode.1. Start in safe mode, and execute full formatting in theSST, and re-install the system software. Thereafter, turnoff and then on the power.2. Replace the HDD, and re-install the system software.*9 03There is poor contactfor the HDD, or thereis a system error.1. Check the cables and power cord for disconnection.2. Start up in safe mode; then, execute full formattingusing the SST, and re-install the system software.Thereafter, turn off and then back on the power.3. Replace the HDD, and re-install the system software.*10 1121There is poorconnection of theHDD.1. Check the cable and the power connectors fordisconnection.2. Replace the HDD, and re-install the system software.*11 1325A write operation hasbeen suspended.File data as of Box on the HDD may be damaged.1. Set '0' for CHK-TYPE, and execute HD-CHECK;then, turn off and then back on the power.2. Set '1' for CHK-TYPE, and execute HD-CLEAR.(In the case of APL_SEND or BOOTDEV, reformatusing the SST and re-install the system software.)3. Replace the HDD, and re-install the system software.YY Description Remedy