The data that has been received is of a type thatcannot be handed (i.e., part of its MIMEinformation is not supported).Ask the source to check the settings andtransmit once again.# 828HTML data has been received. Ask the source to use a format other thanHTML.# 829The data that is being received consists of 100pages or more.The machine is designed so that it removes datafor the 100th and subsequent pages and printsor saves in memory up to the 999th page. Askthe source to transmit the remaining pages oneagain.# 830A DSN error notice has been received becauseof the following: the i-fax address or the targetsettings are wrong, or the data of the file thathas been transmitted is greater than the sizepermitted by the mail server.1. Check the i-fax address and the targetsettings.2. In user mode, decrease the upper limitimposed on the size of transmission data so thatit is lower than the size permitted by the mailserver.3. Check the condition of the mail server, DNSserver, and network.# 831An attempt to receive i-fax in SMTP has failedbecause of the reception/printing range settingsmade as part of the IP address range setting inuser mode.Change the reception/printing range settingsmade as part of the IP address range setting inuser mode.# 832In user mode, the e-mail setting or the networksetting is yet to be made, causing a mail serverfault and, thus, preventing reception of MDN(transmission confirmation) mail.1. In user mode, check the DNS setting, e-mail/i-fax setting, and IP address made as part of thenetwork settings.2. Check the condition of the mail server andthe DNS server.# 833The network settings have not been made inuser mode or there is a mail-server related fault,thus preventing the transmission of the mail(MDN; transmission acknowledgement).1. In user mode, check the DNS setting, e-mail/i-fax setting, and IP address made as part of thenetwork settings.2. Check the condition of the mail server andthe DNS server.# 834Cause Remedy