Chapter 55-57T-5-46CARD Use it to reset the data related to card ID (group).The card ID-related data will be reset when the main power switchis turned off and then back on.Procedure1) Select the item, and press the OK key.2) Turn off and then back on the main power.1ALARM Use it to reset the alarm log.The alarm log will be reset when the main power switch is turnedoff and the back on.Procedure1) Select the item, and press the OK key.2) Turn off and then back on the main power.1SND-STUP Use it to reset the transmission read settings.The transmission read settings will be reset when the main powerswitch is turned off and then back on.Procedure1) Select the item, and press the OK key.2) Turn off and then back on the main power.2CA-KEY Use it to reset the CA certificate and key.The CA certificate and the key will be reset when the main powerswitch is turned off and then back on.Procedure1) Select the item, and press the OK key.2) Turn off and then back on the main power.2COPIER > FUNCTION > MISC-RSub-item Description LevelSCANLAMP Use it to turn on the scanning lamp.Procedure1) Select the item.2) Press the OK key so that the scanning lamp goes on and remainson for 3 sec.1COPIER > FUNCTION > CLEARSub-item Description Level
