Chapter 55-58T-5-47COPIER > FUNCTION > MISC-PSub-item Description LevelP-PRINT Use it to print out service mode settings.Procedure1) Select the item.2) Press the OK key to generate a printout.1USER-PRT Use it to print out user mode settings.Procedure1) Select the item.2) Press the OK key to generate a printout.1PRE-EXP Checking the pre-exposure lamp (LED).1) Select the item to highlight.2) Press the OK key to execute various operations for severalseconds. The operation will stop automatically. (full activation)3) Press the OK key to generate a printout.ReferenceIf the photosensitive drum suffers a fault as the result of lampactivation, rotate the drum.1D-PRINT Use it to print out service mode settings (DISPLAY).The settings under DISPLAY will be printed (not including P-PRINT, LBL-PRINT, HIST-PRINT and ALARM).Procedure1) Select the item.2) Press the OK key to generate a printout.1ENV-PRT Use it to print out a log of changes in the machine insidetemperature/humidity and in fixing temperature.The log will show changes in the machine inside temperature/humidity and in fixing temperature (center) collected from themonitor outputs of the non-contact thermistor and theenvironment sensor.1) Select the item.2) Press the OK key to generate a printout.1KEY-HIST Use it to print out the history of control panel key inputs.1) Select the item.2) Press the OK key to generate a printout.2HIST-PRT Use it to print out the jam history and the error history.Procedure1) Select the item.2) Press the OK key to generate a printout.2