Contents2.7.4 When Replacing the Main Controller PCB ............................................................................................... 2-482.8 Pickup/Feeding System .................................................................................................................................... 2-492.8.1 Orientation of the Deck/Cassette Pickup Roller ........................................................................................ 2-492.8.2 Orientation of the Separation Roller.......................................................................................................... 2-492.8.3 Orientation of the Feeding Roller of the Deck/Cassette Pickup ............................................................... 2-502.8.4 Adjusting the Pressure of the Separation Roller of the Deck/ ................................................................... 2-512.8.5 Adjusting the Pressure of the Separation Roller of the Manual Feed ....................................................... 2-512.8.6 Adjusting the Position of the Pickup Solenoid (SL3, SL4) of the ............................................................ 2-522.8.7 Adjusting the Position of the Delivery Flapper Solenoid (SL5)................................................................ 2-532.8.8 Adjusting the Position of the Right Deck Pickup Solenoid (SL6) ............................................................ 2-532.8.9 Adjusting the Position of the Left Deck Pickup Solenoid (SL7)............................................................... 2-542.8.10 Adjusting the Position of the Reversing Flapper Solenoid(SL8) ............................................................ 2-542.8.11 Attaching the Side Guide Timing Belt in the Manual Feed Tray ...........................................................2-552.8.12 Adjusting the Position of the Lifter Motor M20 (M21) of the ............................................................... 2-55