Printing does not startThe Data Reception Lamp on the Control Panel does not light up ............................................................... 1054The printer does not respond even if print jobs are sent ............................................................................... 1054Ink Filling.. is displayed .................................................................................................................................. 1054The display screen indicates Agitating ......................................................................................................... 1055The Data Reception Lamp on the Control Panel does not light upCause Corrective ActionThe printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Powerbutton to turn on the printer.The printer is not selected in theprinter driver. (The printer is inSleep mode.)In Windows, select the printer by clicking Select Printer or Printer in the print-ing dialog box and try printing again.In Mac OS X, select the printer by clicking Printer Setup Utility (or Print Cen-ter ) and try printing again.The print job is paused. (The print-er is in Sleep mode.)In Windows, restart the print job as follows.1. Select the printer icon in the Printers and Faxes (or Printers ) window.2. Clear Pause Printing in the File menu to restart the print job.In Mac OS X, restart the print job as follows.1. Click Print & Fax. (This is identified as Printer Setup Utility in some ver-sions of Mac OS X.)2. Select the printer, and then Start Jobs in the Printers menu to restart the printjob.The printer does not respond even if print jobs are sentCause Corrective ActionIn the Control Panel menu, Pause Print isOn.Set Pause Print to Off.(See "Pausing Printing.") →P.16You have selected Save in mail box inOutput Method on the printer.Print the job saved on the printer's hard disk.(See "Printing Saved Jobs.") →P.725Print jobs are pending. Manage the jobs on hold and print as needed.(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")→P.722Ink Filling.. is displayedCause Corrective ActionThe printer was forced off during oper-ation.Wait until the system has been filled with ink. This process may take aboutnine minutes.Troubleshooting > Printing does not start >The Data Reception Lamp on the Control Panel does not light up iPF8300121054Downloaded from ManualsPrinter.com Manuals