5. Print on the roll.6. Turn off the Media Take-up Unit.7. Remove the printed document from the media take-up unit. (See "Removing Printed Documents from the MediaTake-up Unit (Optional).") →P.8318. Disable roll take-up. (See "Disabling Roll Take-Up.") →P.823Important• The Media Take-up Unit cannot be used with sheets.• If you have attached the Output Stacker, always stow it before using the Media Take-up Unit. (See "Storingthe Output Stacker.") →P.819Arrange the Basket Cloth and Basket Rod so they do not interfere with the Media Take-up Sensor.• Do not put anything near the Media Take-up Sensor that might interfere with it. This may impair operation.• Rolls are not cut automatically when the Media Take-up Unit is used, regardless of the Cutting Mode settingin the printer menu or the Automatic Cutting setting in the printer driver. However, you can cut paper bypressing the Cut button.• Color tones after printing may change during the ink drying period for some types of paper. Allow ampledrying time before the final check of colors, and do not remove printed documents from the Media Take-upUnit too soon.• In humid environments, documents printed using plenty of ink on relatively insubstantial media such as light-weight Coated Paper may not be retracted evenly by the unit. In this case, take steps to control humidity inthe operating environment, or adjust the Roll DryingTime setting so that printed documents are retractedafter the ink has fully dried.• In humid environments, documents printed on Fabric Banner or Synthetic Paper may not be retracted evenlyby the unit. In this case, take steps to control humidity in the operating environment, or adjust the Roll Dry-ingTime setting so that printed documents are retracted after the ink has fully dried.Enabling Roll Take-Up1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Set./Adj. Menu is displayed.3. Press ▲ or ▼ to select Take-up Reel, and then press the OK button.Handling Paper > Media take-up unit >Enabling Roll Take-Up iPF83007822Downloaded from ManualsPrinter.com Manuals
