6. Load the Rewind Spool on the Media Take-up Unit so that the gear of the Rewind Spool (a) meshes with the gear ofthe Right Media Take-up Unit (b).Important• If you attempt to load the Rewind Spool with the left and right ends inverted by mistake, the MediaTake-up Unit cannot be turned on.• If the gear of the Rewind Spool (a) does not mesh with the gear of the Right Media Take-up Unit (b),the Media Take-up Unit cannot be turned on.7. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.8. Press the OK button.The Set./Adj. Menu is displayed.9. Press ▲ or ▼ to select Take-up Reel, and then press the OK button.10. Press ▲ or ▼ to select Auto Feed, and then press the OK button.The roll is now advanced to the Media Take-up Unit.Handling Paper > Media take-up unit >Loading the Rewind Spool on the Media Take-up Unit iPF83007826Downloaded from ManualsPrinter.com Manuals
