3. With the edge of the roll paper facing forward as shown, insert the Roll Holder from the right of the roll. Insert itfirmly until the roll touches the flange (a) of the Roll Holder, leaving no gap.4. Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the position shown (b), push itfirmly in until the flange (a) of the Holder Stopper touches the roll. Lock the Holder Stopper lever (c) by pushing itdown toward the shaft side.Loading Rolls in the PrinterFollow these steps to load rolls in the printer.Important• Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not beadvanced correctly when you turn the printer on.Handling Paper > Handling rolls >iPF8300 Loading Rolls in the Printer7777Downloaded from ManualsPrinter.com Manuals
