4. Press ▲ or ▼ to select the type of paper, and then press the OK button.Note• When Head Height is set to Automatic, the setting value selected for the previous print job is dis-played (to the right of Automatic ) once you select the type of paper currently supplied.However, the value is cleared when the printer is turned off or the paper is replaced.5. Press ▲ or ▼ to select Head Height, and then press the OK button.6. Press ▲ or ▼ to select the desired setting value, and then press the OK button.Note• Using Automatic will ensure that the printer adjusts the Printhead height to the optimal level beforeprinting, accounting for the ambient temperature and humidity. When a setting other than Automaticis used, that value will always be applied.• Depending on the type of paper, some setting values may not be available.Adjustments for Better Print Quality > Adjusting the Printhead >Troubleshooting Paper Abrasion and Blurry Images (Head Height) iPF83008844Downloaded from ManualsPrinter.com Manuals