Cause Corrective ActionPress ▲ or ▼ to selectChange Paper, and then pressthe OK button to stop printing.Either change the printer driv-er Paper Source setting or re-place the paper with paperlong enough for the print job,and then try printing again.When using the Media Take-up Unit, press ▲ or ▼ to se-lect Stop Printing, and thenpress the OK button to stopprinting.Remove the printed documentfrom the Media Take-up Unit,replace the roll with a roll thathas enough paper for the printjob, and then try printingagain.(See "Removing the Rollfrom the Printer.") →P.786(See "Loading Rolls in thePrinter.") →P.777(See "Removing PrintedDocuments from the MediaTake-up Unit (Optional).")→P.831Press ▲ or ▼ to select StopPrinting or press the Stopbutton to stop printing.This paper cannot be used.Cause Corrective ActionPaper that is too large for the printer has beenloaded.Lift the Release Lever and load paper of the correct size.(See "Paper Sizes.") →P.771Paper that is too small for the printer has beenloaded.Lift the Release Lever and load paper of the correct size.(See "Paper Sizes.") →P.771Paper has been loaded that is too small to printthe test pattern for printhead adjustment or noz-zle checking.Lift the Release Lever and load unused paper A4/Letter (vertical) orlarger. More than one sheet may be required depending on the ad-justment.Roll printing is selected.Cause Corrective ActionYou have attempted to print on a roll,but no roll is loaded.Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.Load the roll, and then print.(See "Attaching the Roll Holder to Rolls.") →P.774(See "Loading Rolls in the Printer.") →P.777Error Message > Messages regarding paper >This paper cannot be used. iPF8300131086Downloaded from ManualsPrinter.com Manuals
