E-27Applying Effects to Tones Chorus Level (Range: 000 to 127)Specifies the size of the chorus sound. Chorus Rate (Range: 000 to 127)Specifies the undulation speed of the chorus sound. Ahigher value produces faster undulation. Chorus Depth (Range: 000 to 127)Specifies the undulation depth of the chorus sound. Ahigher value produces deeper undulation.• Whether or not an effect is applied to the parts that aresounding also depends on Mixer Mode Reverb Send,Chorus Send, and DSP on/off settings. See “Mixer Function”on page E-36 for more information.This keyboard has a built-in four-band equalizer and 10different settings from which you can choose. You can adjustthe gain (volume) of all four equalizer bands within the rangeof –12 to 0 to +12.1. Press the EFFECT button so the pointer appearsnext to EFFECT on the display screen.2. Press the [ ] CURSOR button three times.• This displays the equalizer editing screen.• The equalizer type setting (step 4) screen will appearautomatically about fives seconds after you press thebutton.3. Press the [ ] CURSOR button.4. Use the [+] and [–] buttons or the number buttonsto select the equalizer type you want.• See the list on page A-13 for information about theequalizer types that are available.Example:To select Jazz• Pressing the EXIT or EFFECT button exits theequalizer setting screen.1. After selecting the equalizer type you want, use the[ ] and [ ] CURSOR buttons to select the bandwhose gain you want to adjust.Example:To adjust the HIGH band2. Use the [+] and [–] buttons or the number buttonsto adjust the band gain.Example:To adjust the gain to 10• Pressing the EXIT or EFFECT button exits theequalizer setting screen.• Changing to another equalizer type causes the band gainsettings to change to the initial settings for the newly selectedequalizer type automatically.CHORUS ParametersUsing the EqualizerTo select the equalizer typeJ zzaTo adjust the gain (volume) of a bandM i g hHqEM i g hHqE707A-E-029A