Casio CTK-900 User Manual

Also see for CTK-900: Midi implementation Service manual

Contents

Casio CTK-900 User Manual Manual pdf 45 page image

E-43Synthesizer ModeUse the following procedure to select a preset tone andchange its parameters to create a user tone.1. First, select the preset tone you want to use as abasis for your user tone.2. Press the SYNTH button.• This enters the Synthesizer Mode, which is indicatedby the pointer next to SYNTH on the display screen.1 Parameter setting value2 Currently selected parameter3. Use the [ ] and [ ] CURSOR buttons to displaythe parameter whose setting you want to change.• Each press of the [ ] or [ ] CURSOR buttonschanges to the next parameter. See “Parameters andTheir Settings” on page E-43 for information on settingrange for each parameter.4. Use [+] and [–] to change the setting of thecurrently selected parameter.• You can also use the number buttons to input a valueto change a parameter setting. See “Parameters andTheir Settings” on page E-43 for information on settingrange for each parameter.5. After you are finished editing the sound, press theSYNTH button to exit the Synthesizer Mode.• See “Storing a User Tone In Memory” on page E-45 fordetails on saving user tone data to memory so it is notdeleted.The following describes the function of each parameter andprovides its setting range.z Attack Time (Range: –64 to 00 to +63)Time it takes before the tone sounds after a key is pressedz Release Time (Range: –64 to 00 to +63)Time the tone continues to sound after a key is releasedz Cutoff Frequency(Range: –64 to 00 to +63)High-band cutoff for the harmonic components of the tonez Resonance (Range: –64 to 00 to +63)Resonance of the tonez Vibrato Waveform (Range: See below.)Specifies the vibrato waveform.Creating a User ToneA i meTkt1 2V D l a yebiParameters and Their SettingsValue Meaning WaveformSin Sine Wavetri Triangle WaveSAU Sawtooth WaveSqr Square WaveA i meTktR . i meTleC f F r qfo-R o a n .nseV . y p eTbi707A-E-045A