Casio WK-3200 User Manual

Also see for WK-3200: Midi implementation User guide

Contents

Casio WK-3200 User Manual Manual pdf 33 page image

E-31Applying Effects to Tones738A-E-033AChanging the Settings of CHORUSParametersYou can control the relative strength of an effect and how it isapplied. The parameters you can control depend on the effect.See the following section titled “CHORUS Parameters” formore information.1 After selecting the chorus type you want, use the[] and [] CURSOR buttons to display theparameter whose setting you want to change.• This displays the parameter setting screen.2 Use the [+] and [–] buttons or the number buttonsto input the parameter setting you want.3 Press the EFFECT or EXIT button.• This returns to the tone or rhythm selection screen.CHORUS Parameters Chorus Level (Range: 000 to 127)Specifies the size of the chorus sound. Chorus Rate (Range: 000 to 127)Specifies the undulation speed of the chorus sound. Ahigher value produces faster undulation. Chorus Depth (Range: 000 to 127)Specifies the undulation depth of the chorus sound. Ahigher value produces deeper undulation.NOTE• Whether or not an effect is applied to the parts that aresounding also depends on Mixer Mode Reverb Send,Chorus Send, and DSP on/off settings. See “MixerFunction” on page E-40 for more information.Using the EqualizerThis keyboard has a built-in four-band equalizer and 10different settings from which you can choose. You can adjustthe gain (volume) of all four equalizer bands within the rangeof –12 to 0 to +12.To select the equalizer type1 Press the EFFECT button, so the pointer appearsnext to EFFECT on the display screen.2 Press the [] CURSOR button three times.• This displays the equalizer editing screen.• The equalizer type setting screen (step 4) will appearautomatically about fives seconds after you press thebutton.3 Press the [] CURSOR button.4 Use the [+] and [–] buttons or the number buttonsto select the equalizer type you want.• See the list on page A-14 for information about theequalizer types that are available.Example: To select Jazz• Pressing the EXIT or EFFECT button exits theequalizer setting screen.To adjust the gain (volume) of a band1 After selecting the equalizer type you want, usethe [] and [] CURSOR buttons to select the bandwhose gain you want to adjust.Example: To adjust the HIGH band2 Use the [+] and [–] buttons or the number buttonsto adjust the band gain.Example: To adjust the gain to 10• Pressing the EXIT or EFFECT button exits theequalizer setting screen.NOTE• Changing to another equalizer type causes the bandgain settings to change to the initial settings for the newlyselected equalizer type automatically.ME H i hq gME H i hq gJ a z z