Casio WK-3200 User Manual

Also see for WK-3200: Midi implementation User guide

Contents

Casio WK-3200 User Manual Manual pdf 52 page image

E-50Synthesizer Mode738A-E-052ADSP SettingsUse the DSP editing screen to select the DSP type and to editparameters.1 Select a tone, press the SYNTH button, and thenconfigure parameter settings.2 After everything is the way you want, press the []CURSOR button once.• This advances to the DSP parameter editing screen.• Pressing the [] CURSOR button returns to theSynthesizer Mode parameter screen.This setting specifies DSP parameters. See “DSP Parameters”on page E-28, “Effect List” on page A-14, and “DSP AlgorithmList” on page A-16 for more information.NOTE• If you store an original tone with the DSP line turned on(page E-49), simply recalling the tone automaticallychanges the DSP line, DSP type, and DSP parametersettings. This simplifies the recall of original tones thatinclude a DSP effect.User Tone Creation HintsThe following hints provide helpful advice on making usertone creation a bit quicker and easier.Use a preset tone that is similar to the one you are trying tocreate.Whenever you already have a rough idea of the tone you aretrying to create, it is always a good idea to start with a presettone that is similar. Experiment with various different settings.There are no real rules about what a tone should sound like.Let your imagination run free and experiment with differentcombinations. You may be surprised at what you can achieve.Storing a User Tone In MemoryThe following procedure shows how to store a user tone inmemory. Once a tone is stored, you can call it up just as youdo with a preset tone.To name a user tone and store it inmemory1 Select a preset tone to use as the basis for the usertone, press the SYNTH button to enter theSynthesizer Mode, and make the parameter settingsyou want.2 After making parameter settings to create the usertone, press [] CURSOR button twice.3 Use [+] and [–] to change the user area tone numberon the display until the one where you want tostore the tone is shown.• You can select any tone number from 700 to 799.4 After the tone name is the way you want, press the[] CURSOR button to store the tone.• Use the [+] and [–] buttons to scroll through letters atthe current cursor location.• Use the [] and [] CURSOR buttons to move thecursor left and right.• See the page E-92 for information about inputting text.5 Press [] CURSOR button to save the user tone.• This will display a confirmation message askingwhether you really want to save the data. Press theYES button to save the data.• The message “Complete” appears momentarily on thedisplay, followed by the tone or rhythm selectionscreen.• To abort the save operation at any time, press theSYNTH button or the EXIT button to exit theSynthesizer Mode. Pressing the SYNTH button again(before selecting another tone) returns to theSynthesizer Mode with all of your parameter settingsstill in place.