E-41Mixer Function738A-E-043AUsing the Parameter Edit ModeEditing the Parameters for Channels1 through 16In the Parameter Edit Mode, you can change the settings often different parameters (including tone, volume, and panpot) for the channel you selected on the Mixer screen.To change parameters1 Press the MIXER button.• This causes a pointer to appear on the display next toMIXER.2 Press a CHANNEL button (1 through 16) to select achannel.• Use the [] and [] CURSOR buttons to changebetween channels.3 Use [] and [] CURSOR buttons to select theparameter whose setting you want to change.Example: Select volume setting by displaying “Volume”.• Each press of [] or [] CURSOR button cyclesthrough the parameters.• You can use the [] and [] CURSOR buttons tochange to another channel at any time during thisprocedure.Indicates channel volume of 127V o l u m e4 Use the number buttons or [+] and [–] to changethe parameter setting.Example: Change the setting to “060”.• Pressing the MIXER or EXIT button exits theparameter edit mode.Editing DSP Channel Parameters1 Press the CHANNEL (DSP) button.• You can also select the DSP channel by pressing the[] CURSOR button while Channel 16 is selected.• This selects the DSP channel.• Pressing the [] CURSOR button while the DSPchannel is selected returns to Channel 16.CHANNELMIXER CURSORNumber buttons[+]/[–]V o l u m e
