Casio XW-P1 User Manual

Also see for XW-P1: Manual

Contents

Casio XW-P1 User Manual Manual pdf 11 page image

Getting Ready to PlayE-9Prepare a household power outlet or batteries.• Be sure to comply with the separate “SafetyPrecautions”. Incorrect use of this product creates therisk of electric shock and fire.• Always make sure that the product is turned off beforeplugging in or unplugging the AC adaptor, or beforeloading or removing batteries.Make sure that you use only the AC adaptor (JEITA Standard,with unified polarity plug) specified for this product. Use of adifferent type of AC adaptor can cause malfunction.1. Use the AC adaptor specified for thisSynthesizer to connect it to a household poweroutlet.2. Press 6 POWER to turn on power.• To turn off power, press 6 POWER again.To do this: Do this:(1) Use a pedal Connect an optionally available sustain pedal. For information about the type ofeffect applied when the pedal is depressed, see page E-65.(2) Input sound from another electronicmusical instrumentUse a commercially available connecting cord to connect the output terminal(monaural) of the other instrument to the Synthesizer.*4• You can also apply effects to input sounds (page E-67) and use input soundswhen creating new tones as part of the Synthesizer’s tones (page E-22).(3) Input from an external device Use a commercially available connecting cord to connect the output terminal(stereo) of a CD player or portable audio player to the Synthesizer.*4(4) Input external sound using amicrophoneConnect a commercially available dynamic microphone to the Synthesizer.*4You can use ck MIC VOLUME to adjust sound input with the microphoneindependently of other sound.• For information about applying effects to sound input with a microphone, seepage E-67. For information about using input sounds for tone creation, seepage E-22.(5) Output Synthesizer sound using audioequipment or an amplifierUse a commercially available connecting cord to connect the input terminal(AUX IN, etc.) of the audio equipment or amplifier to the Synthesizer.*4• For monaural output with a single connecting cord, connect the cord to theL/MONO terminal of the Synthesizer.(6) Use headphones Connect optional or commercially available headphones to the Synthesizer.*4• Do not listen to music at very loud volumes for long periods. Doing so createsthe risk of hearing damage.(7) Supply power to the Synthesizer See “Power Supply” below.*4 Before connecting, be sure to turn off power to the Synthesizer and the device being connected, and turn 6 VOLUME downto a low level.Power SupplyUsing a Household Power OutletSpecified AC Adaptor: AD-E95100L6AC adaptor• Configuration and typedepends on yourgeographic location.DC 9.5VHousehold power outlet