Casio XW-P1 User Manual

Also see for XW-P1: Manual

Contents

Casio XW-P1 User Manual Manual pdf 79 page image

Using a Memory CardE-774. Use the bq up (q) and down (w) buttons tomove the item selection cursor (0) to “Save”.• The remainder of the steps are the same as those fromstep 3 under “To save Synthesizer data to a memorycard” (page E-75).■ Memory card Data StorageThe above procedure stores Synthesizer data in a foldernamed MUSICDAT on the memory card.• The MUSICDAT folder is created automatically when youformat the memory card on the Synthesizer (page E-75).• Note that files not in the MUSICDAT folder cannot beloaded, deleted, or renamed by this Synthesizer. You alsowill not be able to load or delete any file stored in anysubfolder inside the MUSICDAT folder.• Make sure that all of the data you want to load is in theMUSICDAT folder on the memory card.1. Insert the memory card into the card slot.2. Referring to the table in step 2 of the procedureunder “To save Synthesizer data to a memorycard” (page E-75), perform the procedurerequired for the type of data you want to loadfrom the card.3. Use the bq up (q) and down (w) buttons tomove the item selection cursor (0) to “CardLoad” (or “Load” if you want to load all data)and then press bq ENTER.• This causes a menu screen like the one shown belowto appear on the display. The sample screen belowshows the screen that appears when you perform thisprocedure from the Step Sequencer Mode.4. Use the bo dial or bq minus (–) and plus (+)buttons to display the file you want to import.5. Use the bq down (w) button to move thecursor downwards, and then use the bo dial orbq minus (–) and plus (+) buttons to display thedestination of the load operation.6. Press the bq ENTER button.7. In response to the “Sure?” message thatappears, press the bq YES button to load or thebq NO button to cancel.1. Press 7 SETTING.2. Use the bq up (q) and down (w) buttons tomove the item selection cursor (0) to“CardUtility” and then press bq ENTER.• This causes the “CARD UTIL” screen to appear.3. Use the bq up (q) and down (w) buttons tomove the item selection cursor (0) to “AllData” and then press bq ENTER.• The remainder of the steps are the same as those fromstep 3 under “To load data to Synthesizer memory froma memory card” (page E-77).Loading Data from a MemoryCardTo load data to Synthesizer memory from amemory cardTo batch load all Synthesizer memory datafrom a memory card