Casio XW-P1 User Manual

Also see for XW-P1: Manual

Contents

Casio XW-P1 User Manual Manual pdf 36 page image

Selecting and Creating TonesE-34The editable parameters described here are for the drum set tones in the Variance tone category. There are two types ofparameters: PCM drum tone specific editable parameters and the same parameters that apply to the other tone categories.■ Editable Drum Set PCM Tone ParametersPreparationDisplay the screen in step 2 of the procedure under “To edit and save a tone as a user tone” on page E-21.Editable Parameter List• Shaded cells indicate a group made up of multiple items. Press bq ENTER to display the items that make up a group.■ Editable Parameters Common to Other Tone CategoriesFor information about Solo Synthesizer tones, see “Other Editable Items” on page E-29.Editable Drum PCM Tone ParametersDisplay Text Description SettingsInst Edit >EntInstrument edit. Group of editable drum tone parameters for eachkeyboard.• Press a keyboard key to specify the keyboard to be edited.• This group can be entered by performing step 1 under “To edit and savea tone as a user tone” (page E-21) and then holding down 7 EDIT.(C-1 to G9)Inst Select >EntInstrument select. Group of editable tone parameters. Keyboard keypressure (Velocity) is divided into four velocity ranges. Each range can beconfigured to sound a different tone (Inst Number).• Use the 9 PART minus (–) and plus (+) buttons to select the rangeyou want to edit.Inst NumberInstrument number. Selects the drum tone wave assigned to eachvelocity range.• See the separate “Appendix” for details about wave types.See the separate“Appendix”.VelRangeHi Velocity range high. Determines the high limit of each velocity range. 0 to 127Volume Volume. Specifies drum sound volume. –128 to 0 to +127Pan Pan. Specifies the stereo position of drum sound. –64 to 0 to +63Rev.Send Reverb send. Specifies how reverb is applied to a drum tone. 0 to 127NoteOffMode Note off mode. Turning on this setting causes note off to be performedwhen a key is released. Off, OnAssign GrpAssign group. Specifies as a value from 1 to 15 which group the currentlyselected keyboard should be placed into. Only one keyboard in a group issounded at any time (non-polyphonic).Off, 1 to 15Pitch LFO >EntPitch LFO. Group of editable LFOs applied to pitch. Group items andsetting ranges are the same as “LFO (Pitch LFO)” under “EditableParameters for All Layers (Layer 1 through Layer 6)” (page E-31).Refer to the cell to theleft.Amp LFO >EntAmp LFO. Group of editable LFOs applied to volume. Group items andsetting ranges are the same as “LFO (Amp LFO)” under “EditableParameters for All Layers (Layer 1 through Layer 6)” (page E-31).Refer to the cell to theleft.Inst Number[1] [2] [3] [4] Cannot bespecified.range 1 range 2 range 3 range 40Velocity Range Hi[1] [2] [3] [4] 127 VelocityB