Sounding Arpeggio Phrases AutomaticallyE-43Use the procedure below to clear preset step data or stepdata that was edited using Step Edit (page E-42) and createnew step data from scratch.• Note that variation type data cannot be cleared.1. Hold down bm ARPEGGIO until the typeselection screen shown below appears on thedisplay.2. From among the preset or user arpeggio typesselect the arpeggio type you want to clear.• The procedure for selecting an arpeggio type is thesame as that for selecting a tone (page E-20).3. Press 7 EDIT.4. Use the bq up (q) and down (w) buttons tomove the item selection cursor (0) to “ClearStep”, and then press bq ENTER.5. Press bq ENTER again.This should cause “Clear?” to appear on the display.6. Press bq YES.The message “Complete!” will appear on the display whenthe data is cleared.Clearing Arpeggio Data
