E-67Other Useful FunctionsThe mixer lets you make adjustments to the tone, volumelevel, and other settings* of the Synthesizer’s sound sourceparts (Parts 01 through 16, external input parts, page E-18),while viewing the balance between the parts on the display.* Settings that affect individual parts are called “partsettings”, wile settings that affect all parts are called“master settings”.1. Press bm MIXER.This displays the mixer screen.2. Use the 9 PART minus (–) and plus (+) buttonsto select the part whose settings you want toconfigure.3. Use the bq cursor (U, q, w, I) buttons toselect the item you want, and then use the bodial or bq minus (–) and plus (+) buttons tochange its setting.• For details about settings, see “Mixer Settings” on pageE-684. After settings are the way you want, press bmMIXER to exit the mixer screen.You can use the 5 1/9 to MASTER sliders and the 4 step(1 to 16) buttons to make instant changes in mixer settings.1. Press bm MIXER.This displays the mixer screen.2. Use the 2 KEY SHIFT, FUNC A/B, and 1-8/9-16buttons to change the part assigned to the 51/9 to MASTER sliders.• Each press of one of the above buttons toggles thebutton between being lit and unlit.bk45297 bm bobqUsing the MixerTo perform thisadjustment: Select this part:Individual settings (pageE-68) of parts 01 through16All, 01 to 16• “All” can be selected to batch adjust allparts from 01 through 16. To select“All”, press the 9 PART minus (–)button once while “01” is displayed.Master settings (pageE-68)Master• To select “Master”, press the 9PART minus (–) button twice while“01” is displayed.External input partsettings (page E-68)Ext• To select “Ext”, press the 9 PARTminus (–) button three times while“01” is displayed.Part being configured Current part settingSetting item list Indicates part being configuredInstant Adjustment of Settings using theSliders and Step Buttons2UnlitLitMasterExtUnlitLitPart 01 - 08Part 09 - 16UnlitLitPart 01 through 08 (or 09 through 16)All parts (leftmost slider only)