Disassembly and Maintenance: Outdoor Units ESIE05-035–6 Part 5 – Disassembly and Maintenance31551.2.2 Removal of Propeller Fan and Fan MotorWarning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.ProcedureStep Procedure PointsP Remove the front and toppanels in accordance with theRemoval Procedure forOutside Panel.1 Remove the propeller fan12Unscrew the four screwsthat fix the air dischargegrille and disengage thefour clicks at the top andbottom of the grille, andthen remove this airdischarge grille.Unfasten the fan lock nutthat fixes the propellerfan.2 Remove the fan motor1234Remove the connector(*) for the fan motor fromthe PC board.(*) Symbol of connector:RZQ71B8V3B: X206ARZQ100~140B:X206A, X207AThe lead wire is clampedin three places. (Click onpartition plate×3 places)Unscrew the threescrews that fix the frontpanel and then pull upthe lead wire.Unfastening the four lockbolts from the fan motorenables the removal ofthis fan motor.P In order to disconnect theconnector, do not pull the leadwire. Hold the connector partand then push the clicks.P Cautions in mounting themotorBe sure to fix the motor leadwire with a clamp. Notheeding this caution will causethe entanglement of the leadwire around the fan, which willresult in damage to the fan.Air discharge grilleFan lock nutPropeller fanClickClickBolts (four numbers)Connector for fan motorScrews(threenumbers)ClampLead wire Propeller fan
