Danfoss VLT AQUA Programming Manual

Also see for vlt aqua: Instructions Design guide Instruction manual Operating instructions Design guide

Contents

2.9.8. 8-9* Bus JogParameters for configuring the Bus Jog.8-90 Bus Jog 1 SpeedRange: Function:100RPM *[0 - par. 4-13 RPM] Enter the jog speed. This is a fixed jog speed activated via theserial port or fieldbus option.8-91 Bus Jog 2 SpeedRange: Function:200RPM *[0 - par. 4-13 RPM] Enter the jog speed. This is a fixed jog speed activated via theserial port or fieldbus option.8-94 Bus Feedback 1Range: Function:0 * [-200 - 200] Write a feedback to this parameter via the serial communicationport or fieldbus option. This parameter must be selected in par.20-00, 20-03 or 20-06 as a feedback source.8-95 Bus Feedback 2Range: Function:0 * [-200 - 200] See par. 8-94Bus Feedback 1 for further details.8-96 Bus Feedback 3Range: Function:0 * [-200 - 200] See par. 8-94Bus Feedback 1 for further details.2.10. Main Menu - Profibus - Group 92.10.1. 9-** ProfibusParameter group for all Profibus-specific parameters. Only available if Profibus option is mounted9-15 PCD Write ConfigurationArray [10]Select the parameters to be assigned to PCD 3 to 10 of the tele-grams. The number of available PCDs depends on the telegramtype. The values in PCD 3 to 10 will then be written to the se-lected parameters as data values. Alternatively, specify a stand-ard Profibus telegram in par. 9-22.NoneVLT ® AQUA Drive Programming Guide 2. Parameter DescriptionMG.20.O2.02 - VLT ® is a registered Danfoss trademark 1152