Danfoss VLT AQUA Programming Manual

Also see for vlt aqua: Instructions Design guide Instruction manual Operating instructions Design guide

Contents

[104] Torque relative to lim-it[105] Torque relative to rat-ed[106] Power[107] Speed[108] Torque[113] Ext. Closed Loop 1[114] Ext. Closed Loop 2[115] Ext. Closed Loop 35-60 Terminal 27 Pulse Output VariableOption: Function:[0] * No operation Same options and functions as par. 5-6*Pulse Outputs.Select the operation variable assigned for terminal 27 readouts.This parameter cannot be adjusted while the motor is running.5-62 Pulse Output Maximum Frequency #27Range: Function:5000Hz*[0 - 32000 Hz] Set the maximum frequency for terminal 27, corresponding tothe output variable selected in par. 5-60.This parameter cannot be adjusted while the motor is running.5-63 Terminal 29 Pulse Output VariableOption: Function:[0] * No operation Select the variable for viewing on the terminal 29 display.This parameter cannot be adjusted while the motor is running.5-65 Pulse Output Maximum Frequency #29Option: Function:[5000Hz] *0 - 32000 Hz Set the maximum frequency for terminal 29 corresponding tothe output variable set in par. 5-63.This parameter cannot be adjusted while the motor is running.5-66 Terminal X30/6 Pulse Output VariableOption: Function:[0] * No operation Select the variable for read-out on terminal X30/6. This param-eter cannot be adjusted while the motor is running.This parameter is active when option module MCB 101 is instal-led in the frequency converter.2. Parameter Description VLT ® AQUA Drive Programming Guide94 MG.20.O2.02 - VLT ® is a registered Danfoss trademark2