Danfoss VLT AQUA Programming Manual

Also see for vlt aqua: Instructions Design guide Instruction manual Operating instructions Design guide

Contents

2.2.10. Time Zone Offset, 0-730-73 Time Zone OffsetRange: Function:0.00* [ -12.00 - 13.00] Sets the time zone offset to UTC, this is needed for automaticDST adjustment.0-74 DST/SummertimeOption: Function:Choose how Daylight Saving Time/Summertime should be han-dled. For manual DST/Summertime enter the start date and enddate in par. 0-76 and 0-77.[0] * OFF[2] Manual0-76 DST/Summertime StartRange: Function:2000-01-0100:00 *[2000-01-01 00:00 –2099-12-31 23:59 ]Sets the date and time when summertime/DST starts. The dateis programmed in the format selected in par. 0-71.0-77 DST/Summertime EndRange: Function:2000-01-0100:00 *[2000-01-01 00:00 –2099-12-31 23:59 ]Sets the date and time when summertime/DST ends. The dateis programmed in the format selected in par. 0-71.0-79 Clock FaultOption: Function:Enables or disables the clock warning, when the clock has notbeen set or has been reset due to a power-down and no backupis installed.[0] * Disabled[1] Enabled0-81 Working DaysArray with 7 elements [0]-[6] displayed below parameter number in display. Press OK andStep between elements by means of ▲ and ▼ buttons on the LCP.Set for each weekday if it is a working day or a non-workingday. First element of the array is Monday. The working days areused for Timed Actions.[0] No[1] * YesVLT ® AQUA Drive Programming Guide 2. Parameter DescriptionMG.20.O2.02 - VLT ® is a registered Danfoss trademark 432