Danfoss VLT AQUA Programming Manual

Also see for vlt aqua: Instructions Design guide Instruction manual Operating instructions Design guide

Contents

[19] Warning See parameter group 5-3* for further description.[20] Alarm (trip) See parameter group 5-3* for further description.[21] Alarm (trip lock) See parameter group 5-3* for further description.[22] Comparator 0 Use the result of comparator 0 in the logic rule.[23] Comparator 1 Use the result of comparator 1 in the logic rule.[24] Comparator 2 Use the result of comparator 2 in the logic rule.[25] Comparator 3 Use the result of comparator 3 in the logic rule.[26] Logic rule 0 Use the result of logic rule 0 in the logic rule.[27] Logic rule 1 Use the result of logic rule 1 in the logic rule.[28] Logic rule 2 Use the result of logic rule 2 in the logic rule.[29] Logic rule 3 Use the result of logic rule 3 in the logic rule.[30] Time-out 0 Use the result of timer 0 in the logic rule.[31] Time-out 1 Use the result of timer 1 in the logic rule.[32] Time-out 2 Use the result of timer 2 in the logic rule.[33] Digital input DI18 Use the value of DI18 in the logic rule (High = TRUE).[34] Digital input DI19 Use the value of DI19 in the logic rule (High = TRUE).[35] Digital input DI27 Use the value of DI27 in the logic rule (High = TRUE).[36] Digital input DI29 Use the value of DI29 in the logic rule (High = TRUE).[37] Digital input DI32 Use the value of DI32 in the logic rule (High = TRUE).[38] Digital input DI33 Use the value of DI33 in the logic rule (High = TRUE).[39] Start command This logic rule is TRUE if the frequency converter is started byany means (either via digital input, field bus or other).[40] Drive Stopped This logic rule is TRUE if the frequency converter is stopped orcoasted by any means (either via digital input, fieldbus or other).[41] Reset Trip This logic rule is TRUE if the frequency converter is tripped (butnot trip-locked) and the reset button is pressed.[42] Auto Reset Trip This logic rule is TRUE if the frequency converter is tripped (butnot trip-locked) and an Automatic Reset is issued.[43] OK Key This logic rule is TRUE if the OK key on the LCP is pressed.[44] Reset Key This logic rule is TRUE if the Reset key on the LCP is pressed.[45] Left Key This logic rule is TRUE if the Left key on the LCP is pressed.[46] Right Key This logic rule is TRUE if the Right key on the LCP is pressed.[47] Up Key This logic rule is TRUE if the Up key on the LCP is pressed.[48] Down Key This logic rule is TRUE if the Down key on the LCP is pressed.[50] Comparator 4 Use the result of comparator 4 in the logic rule.[51] Comparator 5 Use the result of comparator 5 in the logic rule.VLT ® AQUA Drive Programming Guide 2. Parameter DescriptionMG.20.O2.02 - VLT ® is a registered Danfoss trademark 1392