CD820 Instant Issuance System User’s Guide 234. Load a full roll of print ribbon (the blue spool) ontothe spindle closest to the cartridge handle until itclicks into place.5. Place the silver take-up spool on the spindle with theblack gear until it clicks into place.6. Wind the take-up spool counterclockwise one fullturn.Load the Cleaning SleeveLoad a new cleaning sleeve when you load a new rollof print ribbon, when you notice debris on theprinted cards, or when the cleaning sleeve is nolonger sticky.1. Remove the cleaning roller spindle with the usedcleaning sleeve from the ribbon cartridge.2. Remove the used cleaning sleeve from thespindle and discard it.3. Slide the spindle into a new cleaning sleeve (a).4. Place the spindle with the cleaning sleeve ontothe ribbon cartridge (b).5. Remove the protective wrapper from the cleaning sleeve (c).
