168 Dell Printer Configuration Web ToolIf you are using Firefox 3.0, do one of the following:• Select the No Proxy check box, if you do not want to use a proxy.• Select the Auto-detect proxy settings for this network check box.• Select the Manual proxy configuration check box, and then enter ahostname and a port number if you have a list of one or more proxyservers. If you have an IP address that does not use a proxy, enter the IPaddress of the printer in the No Proxy for edit box.• Select the Automatic proxy configuration URL check box.After setting the language and proxy, type <http://nnn.nnn.nnn.nnn/>(the IP address of the printer) in the URL entry field of the browser to activatethe Dell Printer Configuration Web Tool.Setting Up From Operator PanelYou can launch the Dell Printer Configuration Web Tool only when EWS isset to Enable (the factory default) on the operator panel. Confirm the operatorpanel setting if you cannot launch the Dell Printer Configuration Web Tool.For more information, see "Understanding the Printer Menus. "Page Display FormatThe layout of the page is divided into three sections listed below:• Top Frame• Left Frame• Right FrameTop FrameThe top frame is located at the top of all pages. When the Dell PrinterConfiguration Web Tool is activated, the current status and specifications ofthe printer are displayed in the top frame on every page.The following items are displayed in the top frame.Downloaded from ManualsPrinter.com Manuals
