330 CopyingFILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section18.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY2 Press the (Copy) button.3 Press button until Margin Top/Bottom is highlighted, and thenpress the (Set) button.4 Press or button or enter the desired value using the numeric keypad,and then press the (Set) button.* Denotes the factory default setting.5 Press the (Start) button to begin copying.Margin Left/RightTo specify the left and right margins of the copy:1 Load the document(s) facing up with top edge in first into the ADF.ORPlace a single document facing down on the document glass, and close thedocument cover.For details about loading a document, see "Making Copies From theDocument Glass" and "Making Copies From the ADF."2 Press the (Copy) button.3 Press until Margin Left/Right is highlighted, and then press the(Set) button.4 Press or button or enter the desired value using the numeric keypad,and then press the (Set) button.* Denotes the factory default setting.0.2 inch* (4mm*)Specify the value in increments of 0.1 inch (1 mm).0.0–2.0 inch(0–50 mm)0.2 inch* (4mm)Specify the value in increments of 0.1 inch (1 mm).0.0–2.0 inch(0–50 mm)Downloaded from ManualsPrinter.com Manuals
