394 FaxingFILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LYWhen the document is loaded on the document glass, the display promptsyou for another page. Press or button to select Yes to add moredocuments or to select No to begin sending the fax immediately, and thenpress the (Set) button.The printer starts dialing the number, and then sending the fax when theremote fax machine is ready.NOTE: You can cancel the fax job at any time while sending the fax bypressing the (Cancel) button.NOTE: Pressing the (Start) button does not start sending a fax when theavailable time is set or the Fax service is locked. (For details, see "SetAvailable Time" for the Available time and "Function Enabled" for the Faxservice.)Sending a Fax Manually1 Load the document(s) facing up with top edge in first into the ADF.ORPlace a single document facing down on the document glass, and close thedocument cover.For details about loading a document, see "Loading an Original Document."2 Press the (Fax) button.3 Adjust the document resolution to suit your fax needs. (For details, see"Adjusting the Document Resolution." For adjusting the contrast, see"Adjusting the Document Contrast.")4 Press button until OnHook is highlighted, and then press the (Set)button.5 Press or button until On is highlighted, and then press the (Set)button.6 Enter the remote fax machine's fax number using the numeric keypad.7 If the document is loaded on the ADF, press the (Start) button.If the document is not loaded on the ADF, press the (Start) button, pressor button until the desired setting is highlighted, and then press the(Set) button.Downloaded from ManualsPrinter.com Manuals
