382 FaxingFILE LOCATION: C:\Users\fxstdpc-admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fmD E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY6 Press or button until the desired setting is highlighted or enter thevalue using the numeric keypad, and then press the (Set) button.If necessary, repeat steps 5 and 6.To return to the top screen of the (Menu) menu, press the (AllClear) button.Available Fax Settings OptionsYou can use the following settings options for configuring the fax system:Option DescriptionReceive Mode You can select the default fax receiving mode.• Fax: (automatic receive mode)• Telephone (manual receive mode): Automatic fax reception isturned off. You can receive a fax by picking up the handset ofthe external telephone and then pressing the remote receivecode, or by setting OnHook to On (you can hear voice or faxtones from the remote machine) and then pressing the (Start)button.• Telephone/Fax: When the printer receives an incoming fax, theexternal telephone rings for the time specified in Auto RecFax/Tel, and then the printer automatically receives a fax.If an incoming call is not a fax, the printer beeps from theinternal speaker indicating that the call is a telephone call.• Ans Machine/Fax: The printer can share a telephone line withan answering machine. In this mode, the printer will monitorthe fax signal and pick up the line if there are fax tones. If thephone communication is using serial transmission in yourcountry (such as Germany, Sweden, Denmark, Austria,Belgium, Italy, France and Switzerland), this mode is notsupported.• DRPD: Before using the Distinctive Ring Pattern Detection(DRPD) option, distinctive ring service must be installed onyour telephone line by the telephone company. After thetelephone company has provided a separate number for faxingwith a distinctive ring pattern, configure the fax setup tomonitor for that specific ring pattern.Downloaded from ManualsPrinter.com Manuals
