Connecting Your Printer 97Turning on the PrinterCAUTION: Do not use extension cords or power strips.CAUTION: The printer should not be connected to a UPS system.1 Connect the power cable to the power connector on the rear of the printer,and then to a power source.2 Turn on the printer. When the printer is connected via a USB (UninterruptiblePower Supply) cable, the USB driver is automatically installed.Setting Initial Settings on the Operator PanelYou need to set the printer language, country, clock date, and time when youturn on printer for the first time.When you turn the printer on, the wizard screen to perform the initial setupappears on the operator panel. Follow the steps below to set the initial settings.NOTE: If you do not start configuring the initial settings, Ready to Print appearson the operator panel in three minutes. After that, you can set the following initialsetup by enabling Power on Wizard on the operator panel or Dell PrinterConfiguration Web Tool if needed.Downloaded from ManualsPrinter.com Manuals
