490 Understanding the Printer MenusFax SettingsUse the Fax Settings menu to configure the basic fax settings.NOTE: Values marked by an asterisk (*) are the factory default menu settings.Receive ModePurpose:To select the default fax receiving mode.Values:Auto Rec FaxPurpose:Yes Initializes the wired network data stored in NVM.No * Does not initialize the wired network data stored in NVM.Telephone Automatic fax reception is turned off. You can receive a fax bypicking up the handset of the external phone and then pressing theremote receive code, or by setting OnHook to On (you can hearvoice or fax tones from the remote machine) and then pressing .Fax* Automatically receives faxes.Telephone/Fax When the printer receives an incoming fax, the external telephonerings for the time specified in Auto Rec Tel/Fax, and then theprinter automatically receives a fax. If an incoming call is not a fax,the printer beeps from the internal speaker indicating that the call is atelephone call.AnsMachine/FaxThe printer can share a telephone line with an answering machine. Inthis mode, the printer will monitor the fax signal and pick up the lineif there are fax tones. If the phone communication in your country isserial, this mode is not supported.DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, adistinctive ring service must be installed on your telephone line by thetelephone company. After the telephone company has provided aseparate number for faxing with a distinctive ring pattern, configurethe fax setup to monitor for that specific ring pattern.Downloaded from ManualsPrinter.com Manuals
