5 Press the down arrow button until Jam Recovery appears, and then press .6 Press the down arrow button until On or Auto appears, and then press .Solving print quality problemsThe information in the following topics may help you solve print quality problems. If these suggestions still do notcorrect the problem, then contact Customer Support. You may have a printer part that requires adjustment orreplacement.Isolating print quality problemsTo help isolate print quality problems, print the print quality test pages, but first make sure the standard tray is loaded:1 Turn the printer off.2 Load letter- or A4-size paper in the standard tray. Load the paper stack toward the back of the tray as shown withthe recommended print side facedown. Notice the maximum fill line on the side of the tray to guide you. Do notoverfill the tray.Print the print quality test pages:1 Turn the printer off.2 From the printer control panel, hold down and the right arrow button while turning the printer on.3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.4 Press the down arrow button until Prt Quality Pgs appears, and then press .The print quality test pages print.5 Press the down arrow button until Exit Config Menu appears, and then press .Resetting the Printer appears briefly, followed by a clock, and then Ready appears.Troubleshooting143
