For Macintosh users1 With a document open, choose File > Print.If necessary, click the disclosure triangle to see more options.2 From the print options pop-up menu, choose Job Routing.3 Choose your job type (Confidential, Reserve, Repeat, Verify, profiles, forms from a kiosk, bookmarks, or a parkedjob), and then assign a user name. For a confidential job, also enter a four-digit PIN.4 Click Print, and then go to the printer to release the job.5 From the printer control panel, press the down arrow button until Held jobs appears, and then press .6 Press the down arrow button until appears next to your user name, and then press .7 Press the down arrow button until appears next to your job, and then press .8 For confidential jobs, use the numeric keypad to enter your PIN.If you enter an invalid PIN, the Invalid PIN screen appears.• To re-enter the PIN, make sure Try again appears, and then press .• To cancel the PIN, press the down arrow button until Cancel appears, and then press .9 Press the down arrow button until appears next to the job you want to print, and then press .Printing information pagesSee “Printing a menu settings page” on page 30 and “Printing a network setup page” on page 30 for more informationon printing these pages.Printing a font sample listTo print samples of the fonts currently available for your printer:1 Make sure the printer is on and Ready appears.2 From the printer control panel, press .3 Press the down arrow button until Reports appears, and then press .4 Press the down arrow button until Print Fonts appears, and then press .5 Press the down arrow button until appears next to PCL Fonts or PostScript Fonts, and then press.After the font sample list prints, Ready appears.Printing a directory listA directory list shows the resources stored in flash memory.1 Make sure the printer is on and Ready appears.2 From the printer control panel, press .Printing60
